Coverage: Available in a 3/4” rib height with a 36” coverage width and 9” bell top spacing.
Slope: Minimum recommended roof slope is 3:12.
Length: Minimum cut length is 3’-0.” Maximum recommended cut length is 45’-0.” Longer panels need special consideration for erection, packaging, and shipping.
Fasteners: Exposed fastened, low profile product.
NOTE: All panels are subject to surface distortion when fasteners are improperly applied. Fasteners that are overdriven will cause stress across the face of the panel at or near the point of fastening. *Contact your representative for assistance in choosing the proper fastener for your project.
Gauge: Available in 29 and 26 gauge in both Galvalume and Sherwin-Williams colors.
Substructure: Designed for use over a solid substrate or open structural framing. Uniform and properly aligned substructures are necessary to avoid panel distortion.
Warranties: 40-year Sherwin-Williams limited warranty, 25-year Galvalume warranty